DRIVE SHAFT JOURNAL INSPECTION

id051700665500

Drive shaft (LH)

1.  Remove the drive shaft (LH) from the vehicle.

Note

•  For the drive shaft (LH) removal procedure from the vehicle, verify the Workshop Manual.

2.  Measure the outer diameter of the drive shaft (LH) journal.

azzjjw00001301

Note

•  When measuring, measure near the center of the journal, and then calculate the average value of the X and Y directions as shown in the figure.

•  Recommended measuring instrument: Micrometer

•  If it is the minimum specification or less, disassemble the drive shaft (LH) and replace the outer ring with a new one.

Note

•  For the drive shaft disassembly/assembly procedure, verify the Workshop Manual.

Drive Shaft (RH)

1.  Remove the drive shaft (RH) from the vehicle.

Note

•  For the drive shaft (RH) removal procedure from the vehicle, verify the Workshop Manual.

2.  Measure the outer diameter of the drive shaft (RH) journal.

bfw3ja00000132

Note

•  When measuring, measure near the center of the journal, and then calculate the average value of the X and Y directions as shown in the figure.

•  Recommended measuring instrument: Micrometer

•  If it is the minimum specification or less, replace the drive shaft (RH) with a new one.