PID/DATA MONITOR TABLE [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)]


id0702k2801900

PID

Unit/Condition

Data contents

Climate control unit terminal

A/C_SW
Off/On
•  Off: A/C switch is off.
•  On: A/C switch is on.
B_MT_RLY_CS
Off/On
•  Off: Blower relay is off.
•  On: Blower relay is on.
ELE_W/P
Note
•  Displays in the M-MDS but it does not operate.
ENG_C_TMP
°C, °F
Engine coolant temperature is displayed.
EVA_TMP_SEN
°C, °F
Evaporator temperature is displayed.
R
F_REC_CS
Off/On
•  Off: Forced recirculate control is off.
•  On: Forced recirculate control is on.
F_WIND_TEMP
°C, °F
Windshield temperature is displayed.
HUMIDITY_SEN
%
Relative humidity is displayed.
INC_TMP_SEN
°C, °F
Cabin temperature is displayed.
N
OUT_CAR_TMP
°C, °F
Ambient temperature is displayed.
R/DEF_CS
Off (enable)/
Off (suspend)/
Off (inhibit)/
On
•  Off (enable): Rear window defogger is off (operation enabled).
•  Off (suspend): Rear window defogger is off (operation interrupted / indicator is kept On).
•  Off (inhibit): Rear window defogger is off (operation disabled / indicator is turned Off).
•  On: Rear window defogger is on.
R/DEF_SW
Off/On
•  Off: Rear window defogger switch is off.
•  On: Rear window defogger switch is on.
REC_SW
Off/On
•  Off: RECIRCULATE switch is off.
•  On: RECIRCULATE switch is on.
RLS_TEMP
°C, °F
Humidity sensor temperature is displayed.
SLR_R_SEN
W/m2
Solar radiation amount is displayed.
J
STOP_ST
Available/
Not Available/
Error
•  Available: i-stop permit request signal is sent.
•  Not Available: i-stop inhibit request is sent.
•  Error: i-stop signal error is sent.