RESISTOR INSPECTION

id071100016400

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(2)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

3.  Verify that the resistance between the resistor terminals is as shown in the table.

am3zzw00011049

•  If there is any malfunction, replace the resistor.

Terminal	Resistance (ohm)
A—D	0.54
A—B	1.47
A—C	3.92