ACTIVE COMMAND MODES TABLE [BCM]

id0902f5200200

Note

• Simulation items on parts which are not equipped to the vehicle do not operate.

Simulation item

Unit/Operation

Data contents

Output part name

Operation condition

BG_HORN_RLY

If an accessory part is installed, it cannot be used.

BLWR_RLY

Off/On

•  Off: Turns the blower relay off.

•  On: Turns the blower relay on.

Blower relay

Ignition switched ON (engine off or on)

DR_LK_RY

Off/On

Note

•  The BCM sends a door lock relay operation request signal (lock signal) to the ESU via LIN communication.

•  Off: Does not lock the door.

•  On: Locks the door.

Door lock relay

Ignition switched ON (engine off or on)

DR_UNLK_RY

Off/On

Note

•  The BCM sends a door unlock relay operation request signal (unlock signal) to the ESU via LIN communication.

•  Off: Does not unlock the door.

•  On: Unlocks the door.

Door unlock relay

Ignition switched ON (engine off or on)

F_FOG_RELAY

Off/On

•  Off: Turns the front fog light off.

•  On: Turns the front fog light on.

Front fog light relay

Ignition switched ON (engine off or on)

H/L_CLN_RY

Off/On

•  Off: Turns the headlight cleaner relay off.

•  On: Turns the headlight cleaner relay on.

Headlight cleaner relay

Ignition switched ON (engine off or on)

H/L_DRL

Off/On

Note

•  The BCM sends a running light on request signal to the ESU via LIN communication.

•  Off: The running lights are turned off.

•  On: The running lights are turned on.

Running light

Ignition switched ON (engine off or on)

H/L_HI

0%/100%

Note

•  The BCM sends a headlight HI on request signal to the ESU via LIN communication.

•  0%: The headlights HI are turned off.

•  100%: The headlights HI are turned on.

Headlight HI

Ignition switched ON (engine off or on)

H/L_LOW

0%/100%

Note

•  The BCM sends a headlight LO on request signal to the ESU via LIN communication.

•  0%: The headlights LO and side-illuminating LED are turned off.

•  100%: The headlights LO and side-illuminating LED are turned on.

Headlight LO

Ignition switched ON (engine off or on)

H/L_TNS

Off/Right-On/Left-On/On

Note

•  The BCM sends a TNS on request signal to the ESU via LIN communication.

•  Off: Turns the parking lights off.

•  Right-On: Turns the parking light (RH) on.

•  Left-On: Turns the parking light (LH) on.

•  On: Turns the parking lights (RH/LH) on.

Parking light

Ignition switched ON (engine off or on)

HORN_RLY

Off/On

•  Off: Stops the horn.

•  On: Sounds the horn.

Horn relay

Ignition switched ON (engine off or on)

PTC_HEAT_ST

0%/10%/20%/30%/40%/50%/60%/70%/80%

•  0%: Stops PTC heater output.

•  10%: Controls PTC heater output level to 10%.

•  20%: Controls PTC heater output level to 20%.

•  30%: Controls PTC heater output level to 30%.

•  40%: Controls PTC heater output level to 40%.

•  50%: Controls PTC heater output level to 50%.

•  60%: Controls PTC heater output level to 60%.

•  70%: Controls PTC heater output level to 70%.

•  80%: Controls PTC heater output level to 80%.

PTC heater

Ignition switched ON (engine off or on)

R_DEF_RLY

Off/On

•  Off: Stops the rear window defogger.

•  On: Operates the rear window defogger.

Rear window defogger relay

Ignition switched ON (engine off or on)

R_FOG_LAMP

Off/On

•  Off: Turns the rear fog light off.

•  On: Turns the rear fog light on.

Rear fog light relay

Ignition switched ON (engine off or on)

REVERSE_LMP

Off/On

Note

•  The BCM sends a back-up light on request signal to the ESU via LIN communication.

•  Off: Turns the back-up light off.

•  On: Turns the back-up light on.

Back-up light

Ignition switched ON (engine off or on)

ROOM_LAMP

Off/100%_On

Note

•  The BCM sends a front map light on request signal to the ESU via LIN communication.

•  Off: Turns the front map light off.

•  100%_On: Turn the front map light on.

Front map light

Ignition switched ON (engine off or on)

STOP_LMP_CTL

Off/On

•  Off: Turns the brake light off.

•  On: Turns the brake light on.

Brake light relay

Ignition switched ON (engine off or on)

TRUNK_LAMP

Off/On

Note

•  The BCM sends a cargo compartment light on request signal to the ESU via LIN communication.

•  Off: Turns the cargo compartment light off.

•  On: Turns the cargo compartment light on.

Cargo compartment light

Ignition switched ON (engine off or on)

TRUNK_MOTOR

Off/On

Note

•  The BCM sends a liftgate release signal to the ESU via LIN communication.

•  Off: Does not open the liftgate.

•  On: Opens the liftgate.

Liftgate release relay

Ignition switched ON (engine off or on)

WASHER_CTRL

Off/Front_ON

Note

•  The BCM sends a front washer operation request signal to the ESU via LIN communication.

•  Off: Stops the windshield washer motor.

•  Front_ON: Operates the windshield washer motor.

Windshield washer motor

Ignition switched ON (engine off or on)

WIP_R_CTRL

Off/INT/On/On_1Time/On_2Time/On_3Time/On_4Time

Note

•  The BCM sends a rear wiper operation request signal or rear wiper INT operation request signal to the ESU via LIN communication.

•  Off: Stops the rear wiper.

•  INT: Operates the rear wiper intermittently.

•  On: Operates the rear wiper continuously.

•  On_1Time: —

•  On_2Time: Operates the rear wiper twice.

•  On_3Time: —

•  On_4Time: —

Rear wiper motor

Ignition switched ON (engine off or on)

Simulation item	Unit/Operation	Data contents	Output part name	Operation condition
BG_HORN_RLY	If an accessory part is installed, it cannot be used.
BLWR_RLY	Off/On	• Off: Turns the blower relay off. • On: Turns the blower relay on.	Blower relay	Ignition switched ON (engine off or on)
DR_LK_RY	Off/On	Note • The BCM sends a door lock relay operation request signal (lock signal) to the ESU via LIN communication. • Off: Does not lock the door. • On: Locks the door.	Door lock relay	Ignition switched ON (engine off or on)
DR_UNLK_RY	Off/On	Note • The BCM sends a door unlock relay operation request signal (unlock signal) to the ESU via LIN communication. • Off: Does not unlock the door. • On: Unlocks the door.	Door unlock relay	Ignition switched ON (engine off or on)
F_FOG_RELAY	Off/On	• Off: Turns the front fog light off. • On: Turns the front fog light on.	Front fog light relay	Ignition switched ON (engine off or on)
H/L_CLN_RY	Off/On	• Off: Turns the headlight cleaner relay off. • On: Turns the headlight cleaner relay on.	Headlight cleaner relay	Ignition switched ON (engine off or on)
H/L_DRL	Off/On	Note • The BCM sends a running light on request signal to the ESU via LIN communication. • Off: The running lights are turned off. • On: The running lights are turned on.	Running light	Ignition switched ON (engine off or on)
H/L_HI	0%/100%	Note • The BCM sends a headlight HI on request signal to the ESU via LIN communication. • 0%: The headlights HI are turned off. • 100%: The headlights HI are turned on.	Headlight HI	Ignition switched ON (engine off or on)
H/L_LOW	0%/100%	Note • The BCM sends a headlight LO on request signal to the ESU via LIN communication. • 0%: The headlights LO and side-illuminating LED are turned off. • 100%: The headlights LO and side-illuminating LED are turned on.	Headlight LO	Ignition switched ON (engine off or on)
H/L_TNS	Off/Right-On/Left-On/On	Note • The BCM sends a TNS on request signal to the ESU via LIN communication. • Off: Turns the parking lights off. • Right-On: Turns the parking light (RH) on. • Left-On: Turns the parking light (LH) on. • On: Turns the parking lights (RH/LH) on.	Parking light	Ignition switched ON (engine off or on)
HORN_RLY	Off/On	• Off: Stops the horn. • On: Sounds the horn.	Horn relay	Ignition switched ON (engine off or on)
PTC_HEAT_ST	0%/10%/20%/30%/40%/50%/60%/70%/80%	• 0%: Stops PTC heater output. • 10%: Controls PTC heater output level to 10%. • 20%: Controls PTC heater output level to 20%. • 30%: Controls PTC heater output level to 30%. • 40%: Controls PTC heater output level to 40%. • 50%: Controls PTC heater output level to 50%. • 60%: Controls PTC heater output level to 60%. • 70%: Controls PTC heater output level to 70%. • 80%: Controls PTC heater output level to 80%.	PTC heater	Ignition switched ON (engine off or on)
R_DEF_RLY	Off/On	• Off: Stops the rear window defogger. • On: Operates the rear window defogger.	Rear window defogger relay	Ignition switched ON (engine off or on)
R_FOG_LAMP	Off/On	• Off: Turns the rear fog light off. • On: Turns the rear fog light on.	Rear fog light relay	Ignition switched ON (engine off or on)
REVERSE_LMP	Off/On	Note • The BCM sends a back-up light on request signal to the ESU via LIN communication. • Off: Turns the back-up light off. • On: Turns the back-up light on.	Back-up light	Ignition switched ON (engine off or on)
ROOM_LAMP	Off/100%_On	Note • The BCM sends a front map light on request signal to the ESU via LIN communication. • Off: Turns the front map light off. • 100%_On: Turn the front map light on.	Front map light	Ignition switched ON (engine off or on)
STOP_LMP_CTL	Off/On	• Off: Turns the brake light off. • On: Turns the brake light on.	Brake light relay	Ignition switched ON (engine off or on)
TRUNK_LAMP	Off/On	Note • The BCM sends a cargo compartment light on request signal to the ESU via LIN communication. • Off: Turns the cargo compartment light off. • On: Turns the cargo compartment light on.	Cargo compartment light	Ignition switched ON (engine off or on)
TRUNK_MOTOR	Off/On	Note • The BCM sends a liftgate release signal to the ESU via LIN communication. • Off: Does not open the liftgate. • On: Opens the liftgate.	Liftgate release relay	Ignition switched ON (engine off or on)
WASHER_CTRL	Off/Front_ON	Note • The BCM sends a front washer operation request signal to the ESU via LIN communication. • Off: Stops the windshield washer motor. • Front_ON: Operates the windshield washer motor.	Windshield washer motor	Ignition switched ON (engine off or on)
WIP_R_CTRL	Off/INT/On/On_1Time/On_2Time/On_3Time/On_4Time	Note • The BCM sends a rear wiper operation request signal or rear wiper INT operation request signal to the ESU via LIN communication. • Off: Stops the rear wiper. • INT: Operates the rear wiper intermittently. • On: Operates the rear wiper continuously. • On_1Time: — • On_2Time: Operates the rear wiper twice. • On_3Time: — • On_4Time: —	Rear wiper motor	Ignition switched ON (engine off or on)