DTC: 30:Er01 [AUDIO]
id0902f6036700
|
Description |
CD player mechanism malfunction |
|---|---|
|
Detection condition
|
CD player mechanism malfunction detected.
|
|
Fail-safe
|
Not applicable
|
|
Possible cause
|
• Disc malfunction or malfunction due to customer use method
• CD player malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY IF MALFUNCTIONING LOCATION IS DISC
• After obtaining the customer's consent, insert a disc that was not used when the malfunction occurred into the CD player.
• Does the disc play normally?
|
Yes
|
System is normal. (Explain to the customer that there is a malfunction in the disc or malfunction due to the customer use method.)
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the CD player.
(See CLEARING DTC [AUDIO].)
• Perform a CD inspection using the diagnostic assist function.
• Perform the DTC inspection for CD player.
(See DTC INSPECTION [AUDIO].)
• Is the same DTC displayed?
|
Yes
|
Replace the CD player, then go to the next step.
(See CD PLAYER REMOVAL.)
(See CD PLAYER INSTALLATION.)
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY OTHER DTCs
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning location according to the applicable DTC troubleshooting.
(See DTC TABLE [AUDIO].)
|
|
No
|
DTC troubleshooting completed.
|
||