HEADLIGHT LEVELING ACTUATOR INSPECTION
id091800809700
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the front bumper. (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)
3. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
4. Verify that the voltages of each of the terminals are as indicated in the terminal voltage table.
Terminal Voltage Table (Reference)
am2zzw00010629
|
Terminal |
Signal name |
Connected to |
Measurement condition |
Voltage (V) |
Inspection item(s) |
|
---|---|---|---|---|---|---|
F
|
Headlight leveling actuator signal
|
Headlight leveling switch
|
Headlight LO turned on
|
Headlight leveling switch position 0
|
Approx. 10.1
|
• Headlight leveling switch
• Related wiring harness
|
Headlight leveling switch position -
|
Approx. 9.4
|
|||||
Headlight leveling switch position 1
|
Approx. 8.7
|
|||||
Headlight leveling switch position -
|
Approx. 7.9
|
|||||
Headlight leveling switch position 2
|
Approx. 7.2
|
|||||
Headlight leveling switch position -
|
Approx. 6.5
|
|||||
Headlight leveling switch position 3
|
Approx. 5.8
|
|||||
Headlight leveling switch position -
|
Approx. 5.1
|
|||||
Headlight leveling switch position 4
|
Approx. 4.4
|
|||||
Headlight leveling switch position -
|
Approx. 3.6
|
|||||
Headlight leveling switch position 5
|
Approx. 2.9
|
|||||
I
|
Headlight leveling actuator power supply
|
• Headlight leveling switch
• IG1 relay
|
Headlight LO turned on
|
B+
|
• Headlight leveling switch
• IG1 relay
• Related wiring harness
|
|
Headlight LO turned off
|
1.0 or less
|
|||||
L
|
Ground
|
• Headlight leveling switch
• Body ground
|
Under any condition
|
1.0 or less
|
• Headlight leveling switch
• Related wiring harness
|