HORN INSPECTION

id092200012700

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the front bumper. (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)

3.  Remove the horn. (See HORN REMOVAL/INSTALLATION.)

4.  Apply battery positive voltage to horn terminal A, and connect the horn retaining bolt to ground as shown in the figure, and then verify that the horn sounds.

am2zzw00014427

•  If the horn does not sound, replace the horn. (See HORN REMOVAL/INSTALLATION.)