INSTRUMENTATION/DRIVER INFO. PERSONALIZATION

id092200018400

Caution
•  The personalization feature may not be set correctly if [Not equipped] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not equipped] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).
Note
•  Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.
•  A personalization feature has been adopted which enables the instrument cluster settings to be changed.
•  The setting for each function can be switched using the Mazda Modular Diagnostic System (M-MDS) or the center display (with center display). Refer to the [INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.

Turn and Hazard Indicator Alarm


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Turn Signal Volume.
The volume of the turn and hazard indicator alarm can be changed.
High
Low/High
Instrument cluster


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Turn Signal Volume
The volume of the turn and hazard indicator alarm can be changed.
High
High / Low
Instrument cluster
Reset
Returns the setting content of the turn light system to the initial setting.
No
No / Yes
•  BCM
•  Instrument cluster


Lights-on Reminder Warning Alarm


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Lights On Reminder Volume.
The volume of the lights-on reminder warning alarm can be changed.
High
OFF/Low/High
Instrument cluster


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Light On Reminder Vol
The volume for the lights-on reminder warning alarm can be changed.
High
High / Low / Off
Instrument cluster
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  BCM
•  Forward sensing camera (FSC)
•  Instrument cluster


Temperature (digital speedometer type, analog speedometer type (Type A, B) instrument cluster only)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Temp*1
The temperature unit can be changed.
F° or C°*2
F°/ C°
Instrument cluster


Using instrument cluster (without center display)

Instrument cluster LCD

Function

Initial setting

Setting contents

Control unit
°F or °C*1
The temperature unit can be changed.
°F or °C*2
°F /°C
Instrument cluster

*1  :When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.
*2  :The initial value differs depending on the market.

Distance


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Distance
The distance unit can be changed.
Miles or km*1
Miles / km
Instrument cluster

*1  :The initial value differs depending on the market.