DTC C1267

id040200168000

DTC

C1267

ABS CM internal failure

DETECTION CONDITION

• The on-board diagnostic function detects control module malfunction.

POSSIBLE CAUSE

• Malfunction of ABS CM.

Diagnostic procedure

STEP	INSPECTION		ACTION
1	VERIFY CURRENT STATUS OF MALFUNCTION • Clear DTC from memory. (See ABS ON-BOARD DIAGNOSIS.) • Start engine and drive vehicle at 10 km/h {6.2 mph} or above. • Is same DTC present?	Yes	Replace ABS CM, then go to next step.
1		No	Go to next step.
2	VERIFY AFTER REPAIR PROCEDURE • Is there any other DTC present?	Yes	Go to applicable DTC inspection.
2		No	Troubleshooting completed.

DTC	C1267		ABS CM internal failure
DETECTION CONDITION		• The on-board diagnostic function detects control module malfunction.
POSSIBLE CAUSE		• Malfunction of ABS CM.