|
Item
|
Specification
|
|
Brake fluid type
|
SAE J1703, FMVSS 116 DOT-3
|
|
Brake pedal height (reference value)
|
198 mm {7.80 in}
|
|
Brake pedal play
|
4.9-8.7 mm {0.2-0.3 in}
|
|
Brake pedal-to-floor clearance (Brake pedal when depressed at 147 N {15.0 kgf, 33.0 lbf})
|
79 mm {3.1 in} or more
|
|
Power brake unit fluid pressure when pedal depressed at 200 N {20.4 kgf, 44.9 lbf}
|
At 0 kPa {0 mmHg, 0 inHg}: 600 kPa {6.12 kgf/cm2, 87.0 psi} or more
|
|
Power brake unit fluid pressure when pedal depressed at 200 N {20.4 kgf, 44.9 lbf}
|
At 66.7 kPa {500 mmHg, 19.7 inHg}: 5,500 kPa {56.08 kgf/cm2, 797.5 psi} or more
|
|
Proportioning valve fluid pressure (without ABS)
|
Rear brake fluid pressure when front brake fluid pressure at 4,500 kPa {45.89 kgf/cm2, 652.5 psi}: 3,100 kPa {31.61 kgf/cm2, 449.5 psi}
Rear brake fluid pressure when front brake fluid pressure at 10,000 kPa {101.97 kgf/cm2, 1,450 psi}: 4,750 kPa {48.44 kgf/cm2, 688.8 psi}
|
|
Front disc plate runout limit
|
0.05 mm {0.002 in}
|
|
Minimum front disc plate thickness
|
20 mm {0.79 in}
|
|
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
|
20.8 mm {0.82 in}
|
|
Minimum front disc pad thickness
|
2.0 mm {0.079 in} min.
|
|
Minimum rear brake lining thickness
|
1.0 mm {0.04 in}
|
|
Maximum rear brake drum inner diameter
|
204.3 mm {8.043 in}
|
|
Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}
|
3 notches or less
|