TRANSMISSION/TRANSAXLE TECHNICAL DATA

id055000800100

Clutch

Item

Specification

Clutch fluid type

SAE J1703, FMVSS 116 DOT-3

Clutch pedal height

303 mm {11.9 in}

Clutch pedal free play

15 mm {0.59 in} or less

Clutch pedal disengagement stroke

80—100 mm {3.2—3.9 in}

Clutch cover diaphragm spring fingers maximum depth

0.6 mm {0.024 in}

Maximum clearance of flatness of the pressure plate

0.5 mm {0.020 in}

Clutch cover diaphragm spring fingers maximum misalignment

1.0 mm {0.039 in}

Clutch disc minimum thickness

0.3 mm {0.012 in}

Clutch disc maximum runout

0.7 mm {0.028 in}

Flywheel maximum runout

0.13 mm {0.0051 in}

Item	Specification
Clutch fluid type	SAE J1703, FMVSS 116 DOT-3
Clutch pedal height	303 mm {11.9 in}
Clutch pedal free play	15 mm {0.59 in} or less
Clutch pedal disengagement stroke	80—100 mm {3.2—3.9 in}
Clutch cover diaphragm spring fingers maximum depth	0.6 mm {0.024 in}
Maximum clearance of flatness of the pressure plate	0.5 mm {0.020 in}
Clutch cover diaphragm spring fingers maximum misalignment	1.0 mm {0.039 in}
Clutch disc minimum thickness	0.3 mm {0.012 in}
Clutch disc maximum runout	0.7 mm {0.028 in}
Flywheel maximum runout	0.13 mm {0.0051 in}

Manual Transaxle

Item

Specification

Manual transaxle oil

Grade: API Service GL-4 or GL-5

Viscosity (all-season): SAE 75W-90

Viscosity (above 10 °C {50 °F}): SAE 80W-90

Capacity (approx. quantity): 3.04 L {3.21 US qt, 2.68 lmp qt}

Item	Specification
Manual transaxle oil	Grade: API Service GL-4 or GL-5 Viscosity (all-season): SAE 75W-90 Viscosity (above 10 °C {50 °F}): SAE 80W-90 Capacity (approx. quantity): 3.04 L {3.21 US qt, 2.68 lmp qt}

Automatic Transaxle [FN4A-EL]

Item

Specification

Time lag

N position → D range: 0.4—0.7 s

N position → R position: 0.4—0.7 s

ATF

Type: ATF M‐V

Capacity (approx. quantity): 7.0 L {7.4 US qt, 6.1 lmp qt}

Input/turbine speed sensor resistance

250—600 ohms (ATF temperature: –40—160 °C {–40—320 °F})

Vehicle speed sensor (VSS) voltage

4.5—5.5 V

Item	Specification
Time lag	N position → D range: 0.4—0.7 s N position → R position: 0.4—0.7 s
ATF	Type: ATF M‐V Capacity (approx. quantity): 7.0 L {7.4 US qt, 6.1 lmp qt}
Input/turbine speed sensor resistance	250—600 ohms (ATF temperature: –40—160 °C {–40—320 °F})
Vehicle speed sensor (VSS) voltage	4.5—5.5 V

Line pressure

Position/Range		Specification (kPa {kgf/cm², psi})
D, S, L (Includes each HOLD mode) (*: 4AT)	Idle	330—470 {3.4—4.7, 48—68}
D, S, L (Includes each HOLD mode) (*: 4AT)	Stall	990—1,160 {10.1—11.8, 144—168}
R	Idle	490—710 {5.0—7.2, 71—102}
R	Stall	1,620—1,950 {16.6—19.8, 235—282}

Engine stall speed

Position/Range	Specification (rpm)
D, S, L (Includes each HOLD mode) (*: 4AT)	2,200—2,800
R	2,200—2,800

Transaxle range (TR) switch

Terminal	Position/Range	Resistance (ohm)
B—C	P	4,085—4,515
	R	1,425—1,575
	N	713—788
	D (4AT)	371—410
	D (Sport AT)	132—390
	S (4AT)	190—210
	L (4AT)	87—96

Transaxle fluid temperature (TFT) sensor

ATF temperature (°C {°F})	Resistance (kilohm)
–20 {–4}	236—324
0 {32}	84.3—110.0
20 {68}	33.5—42.0
40 {104}	14.7—17.9
60 {140}	7.08—8.17
80 {176}	3.61—4.15
100 {212}	1.96—2.24
120 {248}	1.13—1.28
130 {266}	0.87—0.98

Solenoid valve (ATF temperature: –40—150 °C {–40—302 °F})

Terminal	Solenoid valve	Resistance (ohm)
A—GND	Shift solenoid A	1.0—4.2
C—GND	Shift solenoid B	1.0—4.2
G—GND	Shift solenoid C	1.0—4.2
B—GND	Shift solenoid D	10.9—26.2
F—GND	Shift solenoid E	10.9—26.2
D—I	Pressure control	2.4—7.3