ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION [ELECTRIC POWER STEERING (EPS)]


id0602001012a1

• The PID/data monitor function is used for optionally selecting input/output signal monitor items pre-set in the EPS CM and reading them out in real-time.

PID/DATA monitor table

Command name

(WDS or equivalent)

Input/output part name

Unit/operation

(WDS or equivalent)

CCNT
DTC (Number of continuous DTCs)
-
EPS_MTR
EPS motor
A
RPM
Engine speed signal
RPM
TRQ_SENS
Torque sensor
Nm
TRQ_SENS_2
Torque sensor
Nm
VPWR
Battery positive voltage
V
VSS
Vehicle speed signal
KPH, MPH