DTC 00: ER01


DTC 00: Er01	Cassette deck
DETECTION CONDITION	• Cassette deck cannot implement insert and eject commands.
POSSIBLE CAUSE	• Defective cassette tape (deformation, broken, or foreign material stuck/attached) • Cassette deck malfunction


Step	Inspection		Action
1	• Is cassette tape able to be ejected?	Yes	Go to the next step.
1	• Is cassette tape able to be ejected?	No	Replace cassette deck.
2	INSPECT CASSETTE TAPE • Inspect condition of cassette tape where error has occurred. • Is cassette tape okay?	Yes	Go to the next step.
2		No	Repair (remove foreign material) or replace cassette tape, then go to the next step.
3	INSPECT CASSETTE DECK • Clear DTC. • Insert and eject cassette tape with no defect. • Start on-board diagnostic test mode. • Is DTC 00: Er01 displayed?	Yes	Replace cassette deck.
3		No	Troubleshooting completed.