DTC 10: ER02, 02: ER02

id0902f6833600

DTC 10: Er02, 02: Er02

MP3 applicable CD player

DETECTION CONDITION

Note
• When error occurs, error message "CHECK CD" is displayed in the LCD.
• Cannot play CD normally or change tracks.

POSSIBLE CAUSE

• Defective CD (scratches or dirt)
• MP3 applicable CD player malfunction

Diagnostic procedure

Step

Inspection

Action

1
VERIFY WHETHER MALFUNCTION IS IN CD PLAYER OR CD
• Play CD and select other song (change tracks).
• Does CD player change tracks?
Yes
Go to Step 3.
No
Not able to change particular tracks.
Go to the next step.
Not able to change any tracks.
Change CD and perform track-change again.
• If CD player changes tracks, then go to Step 3.
• If not, replace the MP3 applicable CD player.
2
INSPECT CD
• Inspect condition of CD where error has occurred.
• Is CD okay?
Yes
Go to the next step.
No
Repair (remove foreign material) or replace the CD, then go to the next step.
3
INSPECT CD PLAYER
• Clear DTC.
• Play CD and select other song (change tracks).
• Start on-board diagnostic test mode.
• Is DTC 10: Er02 or 02: Er02 displayed?
Yes
Replace the MP3 applicable CD player.
No
Troubleshooting completed.