DTC 05:ER07

id0902f6899800

DTC 05:Er07

CD changer (external type)

DETECTION CONDITION

Note

•  When error occurs, error message “CHECK CD” is displayed in the LCD.

•  Base unit detects CD reading error.

POSSIBLE CAUSE

•  Defective CD (scratches or dirt)

•  CD changer (external type) malfunction

Diagnostic procedure

STEP	INSPECTION		ACTION
1	VERIFY WHETHER MALFUNCTION IS IN CD CHANGER OR OTHER PARTS • Play all CD in magazine. • Is CD changer able to read them properly?	Yes	Go to Step 3.
		No	Not able to change particular CD.	Go to next step.
		No	Not able to change any CD.	Go to Step 3.
2	INSPECT CD • Inspect condition of CD where error has occurred. • Is CD okay?	Yes	Go to next step.
2		No	Repair (remove foreign material) or replace CD, then go to next step.
3	INSPECT CD CHANGER (EXTERNAL TYPE) • Clear DTC. • Insert and play CD with no defect. • Start on-board diagnostic test mode. • Is DTC 05:Er07 displayed?	Yes	Replace CD changer (external type).
3		No	Troubleshooting completed.

DTC 05:Er07	CD changer (external type)
DETECTION CONDITION	Note • When error occurs, error message “CHECK CD” is displayed in the LCD. • Base unit detects CD reading error.
POSSIBLE CAUSE	• Defective CD (scratches or dirt) • CD changer (external type) malfunction