NO.2 CASSETTE TAPE PLAYER DOES NOT EJECT THE CASSETTE TAPE

id0903e1805100

2

Cassette tape player does not eject the cassette tape/Possible DTC: 00:Er01, 00:Er04, 00:Er10

Troubleshooting hints
• Cassette tape is malfunctioning.
• Cassette tape player is malfunctioning.
• Cassette patch is broken.
• Poor installation of cassette patch.
Note
• The cassette tape player may not eject the cassette tape due to tape slack, peel-off or adhered seal.

Diagnostic procedure

STEP

INSPECTION

ACTION

1
• Press the eject button on the player.
• Is a "TAPE OUT" message displayed?
Yes
Go to the next step.
No
Replace the cassette patch.
2
• Visually inspect the dust cover on the cassette patch.
• Is there any damage on the cover?
Yes
Replace the cassette patch.
No
Go to the next step.
3
• Inspect the cassette patch installation.
• Is the cassette patch installed securely?
Note
• Inspect the connector for poor connection (such as damaged/bent/pulled-out pins, corrosion).
Yes
Replace the cassette tape player.
Note
• When replacing the cassette tape player, inspect the following:
- Label is not peeling off
- Cassette patch is normal
No
Install the cassette patch securely.
If the cassette patch is broken, replace the cassette patch.