NO.10 CD PLAYER DOES NOT PLAY THE AUDIO DATA (CDDA)

id0903e1806800

10

CD player does not play the audio data (CDDA)

Possible DTC: -

Troubleshooting hints
• CD-R/RW written format is out of specification
• Defective CD-R/RW (e.g., dirty CD, scratch)
• MP3 applicable CD player is malfunctioning
• Data other than the audio data is in CD-R/RW
Note
• The CD player may not play the CD-R/RW properly due to the disc condition.
• If there are MP-3-formatted file and audio data in the same disc, the CD player loads and plays the first session of the data only.

Diagnostic procedure

STEP

INSPECTION

ACTION

1
• Replace with the audio-CD known to be good.
• Does the CD player play the audio-CD properly?
Yes
Go to the next step.
No
Replace the audio unit.
2
• Inspect the written format of the recorded data on the CD-R/RW.
• Is the written format correct?
Yes
Go to the next step.
No
Write the CD-R/RW with the correct specification.
3
• Inspect the recorded data in the CD-R/RW.
• Is any data other than the audio data recorded in the CD-R/RW?
Yes
Replace with the CD-R/RW known to be good (record audio data only), then inspect the CD player operation.
If the CD-R/RW plays:
• Audio system is normal. Explain to the customer that the CD player does not operate properly if the audio data and other data are recorded in the CD-R/RW.
If the CD-R/RW does not play:
• Replace the audio unit.
No
Go to the next step.
4
• Visually inspect the CD-R/RW.
• Is there any dirt or scratch on the CD-R/RW?
Yes
Clean the disc or replace with the CD-R/RW known to be good.
No
Replace the audio unit.