NO.13 MD PLAYER DOES NOT PLAY THE MD/NO SOUND


13	MD player does not play the MD/No sound Possible DTC:07:Er07, 07:Er08, 07:Er10
Troubleshooting hints • Poor connection of MD player connector or terminal (e.g., damaged, bent, pulled-out pin, corrosion) • MD player malfunction • Non-conventional MD (Hi-MD) Note • The Hi-MD has a longer recording time and higher sound quality than the conventional MD. The conventional MD can be formatted to Hi-MD, but it can be played on the Hi-MD player only.


STEP	INSPECTION		ACTION
1	• Turn the radio ON and inspect that there is a sound. • Is there a sound? Note • Check for the volume dial position.	Yes	Go to the next step.
1		No	GO to the symptom troubleshooting No.3 (Audio system).
2	• Replace the MD known to be good. • Does MD player play the MD properly? Note • Do not use the MD recorded in MDLP format.	Yes	Explain to the customer that Hi-MD cannot be used.
2		No	Go to the next step.
3	• Turn the ignition switch to the LOCK position. • Inspect the connection of the MD player connector. • Inspect both MD player connector and wiring harness-side connector for poor connection (such as damaged/bent/pulled-out pins, corrosion) • All the pins and connector normal?	Yes	Replace the MD player.
3		No	If the MD player connector/pin is malfunctioning: • Replace the MD player. If the wiring harness-side connector/pin is malfunctioning: • Repair or replace the pins and/or the connector.