BONNET REMOVAL/INSTALLATION
id091000407200
-
Warning
-
• Removing the bonnet without proper support can be dangerous. The bonnet may fall and injure you. Always perform the following procedure with at least another person.
1. Disconnect the windshield washer hose.
2. To remove the bonnet hinge, remove the front fender panel.
3. Remove in the order indicated in the table.
|
1
|
Bonnet insulator
|
|
2
|
Shroud seal weatherstrip
|
|
3
|
Air duct
|
|
4
|
Bonnet
|
|
5
|
Bonnet hinge
|
|
6
|
Bonnet stay
|
4. Install in the reverse order of removal.
5. Adjust the bonnet. (See BONNET ADJUSTMENT.)
