1. Disconnect the negative battery cable.
2. Open the cap using a small flathead screwdriver, then remove screw A.
3. Remove the inner handle cover.
4. Remove the recess cover on vehicles with a recess cover.
5. Remove screw B.
6. Disengage clips A from the body using a fastener remover.
7. Pull the rear door trim upward, then disengage clips B from the rear door trim.
8. Disconnect the power window subswitch connector.
9. Remove clips B from the body using a fastener remover, then install them to the rear door trim.
10. Install in the reverse order of removal.