PCM CONFIGURATION [MZ-CD 1.6 (Y6)]

id0140b2802600

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PCM CONFIGURATION.

1.  Connect the M-MDS to DLC-2.

am2zzw00004058

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (notebook PC)

1.  Select “Module Programming”.

3.  Then, select the “Programmable Module Installation” and “PCM” from the screen menu.

4.  Retrieve DTC’s by the M-MDS, then verify that there in no DTC present.

•  If a DTC is present, perform the applicable DTC inspection. (See DTC TABLE [MZ-CD 1.6 (Y6)].)