DIESEL PARTICULATE FILTER LEARNED VALUE RESET [MZ-CD 1.6 (Y6)]


id0140b2806600

Note
•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the DIESEL PARTICULATE FILTER LEARNED VALUE RESET
1.  Connect the M-MDS to the DLC-2.
am2zzw00004058
2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1.  Select the “Powertrain”.
3.  Then, select items from the screen menu in the following order.
1.  Select “Service Functions”.
2.  Select “PCM”.
4.  Select “Reset the Diesel Particulate Filter Learned Values” and perform procedures according to directions on the M-MDS screen.
5.  Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
•  If a DTCs is detected, perform the applicable DTC inspection. (See DTC TABLE [MZ-CD 1.6 (Y6)].)