VARIABLE TUMBLE CONTROL OPERATION [ZJ, ZY]

id0140c4176500

Operation conditions

• When all of the following conditions are met, the PCM energizes the closed-side circuit of the variable tumble shutter valve actuator. As a result, the variable tumble shutter valve closes.

― Engine speed is less than 3,250 rpm.

― Throttle valve opening angle is at specified value or less (changes according to engine speed and engine coolant temperature)

― ECT is less than 60 °C {140°F} .

Inhibition conditions

• When any one of the following conditions are met, the variable tumble control is inhibited and the variable tumble shutter valve is constantly open.

― DTC has been stored for the ECT sensor.

― DTC has been stored for the TP sensor.