REAR SHOCK ABSORBER DISPOSAL

id021400801500

1.  Place the shock absorber on a level surface or with the piston pointing downwards.

2.  Drill a 2—3 mm {0.08—0.11 in} hole at a point 20 mm {0.79 in} from the bottom of the tube, so that the gas can escape.

am2zzw00001918

Warning

•  Whenever drilling into a shock absorber, wear protective eye wear. The gas in the shock absorber is pressurized and could spray metal chips into the eyes and face.

3.  Turn the hole downwards.

4.  The oil can be collected by moving the piston rod several times up and down, and cut the tube at the end.

5.  Dispose of waste oil according to local waste disposal lows.