ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION [DYNAMIC STABILITY CONTROL (DSC)]


id0402b2181800

•  The PID/data monitor function is used for optionally selecting input/output signal monitor items preset in the DSC HU/CM and reading them out in real-time.

PID/data monitor table

Mazda Modular Diagnostic System (M-MDS) display

Data contents

Unit/Operation (Mazda Modular Diagnostic System (M-MDS) display)

BRAKE_SW
Brake switch signal
Off/On
DSC_SW
DSC OFF switch
Off/On
LAT_ACCL
Combined sensor (lateral-G sensor)
G
MCYLI P
Brake fluid pressure sensor
Pa, psi
PMP_MTR
Pump motor
Off/On
STEER_ANGL
Steering angle sensor
°
VSPD
Vehicle speed signal
KPH, MPH
VPWR
Battery voltage
V
V_LF_INT
LF inlet solenoid valve
Off/On
V_LF_OTL
LF outlet solenoid valve
Off/On
V_LR_INT
LR inlet solenoid valve
Off/On
V_LR_OTL
LR outlet solenoid valve
Off/On
V_RF_INT
RF inlet solenoid valve
Off/On
V_RF_OTL
RF outlet solenoid valve
Off/On
V_RR_INT
RR inlet solenoid valve
Off/On
V_RR_OTL
RR outlet solenoid valve
Off/On
V_STB_L
Left stability control solenoid valve
Off/On
V_STB_R
Right stability control solenoid valve
Off/On
V_TRC_L
Left traction control solenoid valve
Off/On
V_TRC_R
Right traction control solenoid valve
Off/On
WSPD_LF
ABS wheel-speed sensor (LF)
KPH, MPH
WSPD_LR
ABS wheel-speed sensor (LR)
KPH, MPH
WSPD_RF
ABS wheel-speed sensor (RF)
KPH, MPH
WSPD_RR
ABS wheel speed sensor (RR)
KPH, MPH
YAW_RATE
Combined sensor (yaw rate value)
°/s