AFTER REPAIR PROCEDURE


id050200800400

1.  Connect the M-MDS to the DLC‐2.

L.H.D.

am2zzw00001261

R.H.D.

am2zzw00000606

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)
1.  Select “Self Test”.
2.  Select “Modules”.
3.  Select “PCM”.
•  When using the PDS (Pocket PC)
1.  Select “Module Tests”.
2.  Select “PCM”.
3.  Select “Self Test”.

3.  Then, select the “Retrieve CMDTCs” and perform procedures according to directions on the M-MDS screen.

4.  Verify the DTC according to the directions on the M-MDS screen.

5.  Press the clear button on the DTC screen to clear the DTC.

6.  Verify that no DTCs are displayed.