NO.27 HOLD INDICATOR LIGHT DOES NOT ILLUMINATE WHEN HOLD SWITCH IS TURNED TO ON

id050300815400

27
HOLD indicator light does not illuminate when HOLD switch is turned to ON
DESCRIPTION
•  HOLD indicator light in dashboard does not illuminate when HOLD switch is turned on and IG SW at ON.
POSSIBLE CAUSE
•  HOLD switch, HOLD indicator light or related wiring harness malfunction.

Diagnostic procedure

STEP

INSPECTION

ACTION
1
Are other indicator lights illuminated with ignition switch ON?
Yes
Go to next step.
No
Inspect meter fuse.
2
Inspect TCS PID value using the M-MDS.
Is TCS PID value okay?
Yes
Inspect instrument cluster.
No
Inspect HOLD switch is okay, inspect for continuity between HOLD switch and PCM terminal 1N.
3
•  Verify test results.
―  If okay, return to diagnostic index to service any additional symptoms.
―  If malfunction remains, inspect related Service informations and perform repair or diagnosis.
•  If vehicle not repaired, trouble shooting completed.
•  If vehicle not repaired or additional diagnostic information not available, replace PCM.