NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R]

id0515a1800700

1. Drain the transaxle oil. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)

2. Remove the bolt A, B.

am2zzw00000202

3. Loosen bolt C and slide engine mount No.1 as shown in the figure.

4. Remove the neutral switch.

am2zzw00000203

5. Install the neutral switch (with a new packing) to the transaxle case.

Tightening torque

20—29 N·m {2.1—2.9 kgf·m, 15—21 ft·lbf}

6. Tighten the bolt A, B.

am2zzw00000204

Tightening torque

A, B: 54—61 N·m {5.6—6.2 kgf·m, 40—44 ft·lbf}

7. Tighten the bolt C.

Tightening torque

C: 43—55 N·m {4.4—5.6 kgf·m, 32—40 ft·lbf}

8. Add the specified amount of specified transaxle oil. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)