TRANSAXLE RANGE (TR) SWITCH REMOVAL

id051700803900

Caution

•  Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

1.  Disconnect the TR switch connector.

(1)  Disconnect the negative battery cable.

(2)  Disconnect the TR switch connector.

am2zzw00001009

2.  Remove the clip and disconnect the selector cable.

am2zzw00001010

Caution

•  Do not use an impact wrench. Hold the manual shaft lever when removing the manual shaft nut, or the transaxle may be damaged.

3.  Set the adjustable wrench as shown to hold the manual shaft lever.

am2zzw00000843

4.  Remove the manual shaft nut, washer and manual shaft lever.

am2zzw00001011

5.  Remove the TR switch from transaxle case.