DTC U0515:68 [INSTRUMENT CLUSTER]
id0902e8988000
|
DTC U0515:68 |
Signal error from keyless control module |
|---|---|
|
Detection Condition
|
Correct data cannot be received from keyless control module
|
|
Possible Causes
|
Keyless control module malfunction
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
INSPECT FOR KEYLESS CONTROL MODULE MALFUNCTION
• Turn the ignition switch to the LOCK position.
• Connect the M-MDS to the DLC-2.
• Perform the keyless control module DTC inspection using the M-MDS.
• Is the DTC displayed again?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT NO OTHER DTCs ARE RECORDED
• Clear DTCs using the M-MDS.
• Perform the instrument cluster DTC inspection using the M-MDS.
• Is DTC U0515:68 displayed?
|
Yes
|
Replace the keyless control module.
|
|
No
|
DTC troubleshooting completed.
|
||