POWER WINDOW SUBSWITCH INSPECTION [3HB]

POWER WINDOW SUBSWITCH INSPECTION [3HB]

id0912004192z3

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION [3HB].)

4. Remove the power window subswitch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY [3HB].)

5. Verify that the continuity is as indicated in the table using a tester.

am2zzw00002472

• If not as indicated in the table, replace the power window subswitch.

am2zzw00002137