POWER OUTER MIRROR INSPECTION

id091200420900

1.  Disconnect the negative battery cable.

2.  Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

3.  Disconnect the power outer mirror connector.

4.  Apply battery positive voltage and connect the ground to the power outer mirror terminals and inspect the power outer mirror operation.

am2zzw00002145

•  If the power outer mirror does not operate as indicated in the table, replace it.

Mirror operation direction	Terminal
	B+	Ground
Up	A	B
Down	B	A
Left	C	B
Right	B	C
Fold	F	D
Unfold	D	F

5.  Verify that the resistance and continuity between the headlight leveling switch terminals is as indicated in the table using a tester.

adejjw00002668

•  If not as indicated in the table, or if the resistance is not within the specification, replace the headlight leveling switch.

am2zzw00002482