BASE INSTALLATION

id091200423400

1.  Using a utility knife, remove sealant from the base and the windshield completely.

Warning
•  Using a utility knife with bare hands can cause injury. Always wear gloves when using a utility knife.

2.  Clean and degrease the ceramic part of the windshield and the base.

Caution
•  To prevent weakening of the primer adhesion, keep the bonding surface free of dirt, moisture, and grease. Do not touch the surface with your hand.

3.  Apply glass primer on the windshield, and body primer on the base, then allow it to dry for approx. 20—30 min.

4.  Apply sealant 3 mm {0.1 in} in thickness as shown in the figure.

am2zzw00003480

5.  Install the base to the position 5 mm {0.2 in} inner from the edge of the ceramic area, then press it firmly.

acxuuw00001983

6.  Remove the excess sealant using isopropyl alcohol.

7.  Allow the sealant to harden completely.

Sealant hardening time

Temperature

Surface hardening time

Hardening time for drive
5 °C {41 °F}
Approx. 1 h 30 min
Approx. 12 h
68 °C {68°F}
Approx. 1 h
Approx. 4 h
95 °C {95°F}
Approx. 10 min
Approx. 2 h

8.  Install the rearview mirror.