•  Manual and auto-open/close can be performed for the driver's door glass via operation of the driver seat switches.

•  Manual open/close can be performed for each specific door glass by operation of the switches at the front and rear passenger seats.

•  By locking the power cut switch, the circuit for each switch at the front and rear passenger seats is not grounded, and operation of the switches is disabled.

•  A built-in P/W CM (power window control module) controls the driver's power window system based on the pulse signals from the driver's power window motor.

•  The position and movement direction of the door glass is stored in the P/W CM at the time of vehicle delivery. Therefore, initial position setting is required if the negative battery cable or the power window main switch connector is disconnected.