KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS AND START SYSTEM]

id0914004394b0

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the KEYLESS CONTROL MODULE CONFIGURATION.

1.  Connect the M-MDS to the DLC‐2.

am2zzw00002103

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select “Module Programing”.

3.  Then, select items from the screen menu in the following order.

1.  Select “Programmable Module Installation”.

2.  Select “RKE”.

4.  Perform the configuration according to the directions on the screen.