DOOR SASH FILM REMOVAL [3HB]
id0916004455z3
1. Partially peel back the glass run channel.
2. Partially peel back the door weatherstrip.
3. Remove the following parts:
- (1) Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)
- (2) Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION [3HB].)
- (3) Power outer mirror (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)
- (4) Sail inner garnish (See SAIL INNER GARNISH REMOVAL/INSTALLATION.)
- (5) Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION [3HB].)
4. Peel off the door sash film by pulling it outward from one end.
-
Note
-
• Slowly remove the door sash film because it could tear easily.
