SIDE STEP MOLDING REMOVAL [3HB]

id0916007176z3

1.  Remove the rivet.

am2zzw00003397

2.  Cut the double-sided adhesive tape shown in the figure using a utility knife and pull clips A and B in the direction of the arrow to remove them.

Warning

•  Using a utility knife with bare hands could cause injury. Always wear gloves when using a utility knife.

3.  Cut the double-sided adhesive tape shown in the figure using a utility knife and pull clip B in the direction of the arrow to remove it.

am2zzw00003398

4.  Slide the side step molding in the direction of the arrow shown in the figure and remove the side step molding from clips B and C.

am2zzw00003399

5.  After removing the side step molding, remove clips B and C from the body using a fastener remover.