B-PILLAR UPPER TRIM REMOVAL/INSTALLATION

id091700459000

1.  Remove the adjuster anchor cover. (See FRONT SEAT BELT REMOVAL/INSTALLATION)

2.  Remove the upper anchor installation bolts of the front seat belt. (See FRONT SEAT BELT REMOVAL/INSTALLATION)

3.  Remove the front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION)

4.  Remove the rear scuff plate. (See REAR SCUFF PLATE REMOVAL/INSTALLATION)

5.  Partially peel back the seaming welt.

6.  Remove the B-pillar lower trim. (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION)

7.  Grasp the lower end of the B-pillar upper trim, pull it in the direction of the arrow shown in the figure, and remove hook A, guide pin B, pin C, and clip D.

am2zzw00001819

8.  Remove the B-pillar upper trim in the direction of the arrow shown in the figure.

adejjw00003390

Caution

•  When removing the B-pillar upper trim, be careful not to damage the tabs.

9.  If there is a remaining clip D, rotate it 90 ° in the direction of the arrow shown in the figure and remove it.

am2zzw00001820

10.  Remove clip D and install it to the B-pillar upper trim.

11.  Install in the reverse order of removal.