Engine coolant and engine oil are at specified level. Spare tire, jack, and tools are in designated position. Adjust to the median when carrying out wheel alignment.
*2 :
Difference between left and right must not exceed 1° 30'.
Item
Specification
Front lower arm ball joint rotational torque
1.0-4.9 N·m {11-49 kgf·cm, 9-43 in·lbf}
Pull scale reading [10-49 N {1.1-4.9 kgf, 3-10 lbf}]
Front stabilizer control link ball joint rotational torque
0.2-2.5 N·m {3-25 kgf·cm, 2-22 ft·lbf}
Wheel And Tire
Item
Specification
Standard tire and wheel
Wheel
Size
14 × 6J
15 × 6J
Offset
(mm {in})
45 {1.8}
Pitch circle diameter
(mm {in})
100 {3.94}
Material
Steel
Steel or
aluminum alloy
Tire
Size
175/65R14 82H
(Australian specs.)
175/65R14 82S
(General (R.H.D.) specs.)
185/55R15 81V
Air pressure
(kPa {kgf/cm2, psi})
Front
210 {2.1, 30}
Rear
180 {1.8, 26}
Remaining tread
(mm {in})
1.6 {0.06}
Wheel and
tire
Wheel and tire runout
(mm {in})
Radial direction
1.5 {0.06} max.
Lateral direction
2.5 {0.10} max.
Steel:
2.5 {0.10} max.
Aluminum alloy:
2.0 {0.08} max.
Wheel imbalance
(g {oz})
10 {0.35} max.
Adhesive-type*1:
13 {0.46} max.
Knock-type*2:
9 {0.32} max.
Tightening torque
(N·m {kgf·m, ft·lbf})
88.2-117.6 {9.00-11.99, 65.06-86.73}
Temporary spare tire
Wheel
Size
14×4T
Offset
(mm {in})
40 {1.57}
Pitch circle diameter
(mm {in})
100 {3.94}
Material
Steel
Tire
Size
T115/70 D14
Air pressure
(kPa {kgf/cm2, psi})
420 {4.2, 60}
Wheel and
tire
Wheel and tire runout
Radial direction
2.0 {0.08} max.
(mm {in})
Lateral direction
2.5 {0.10} max.
Tightening torque
(N·m {kgf·m, ft·lbf})
88.2-117.6 {9.00-11.99, 65.06-86.73}
*1 :
Total weight exceeds 160 g {5.65 oz}.
*2 :
One balance weight: 60 g {2.12 oz} max. If the total weight exceeds 100 g {3.53 oz} on one side, rebalance after moving the tire around on the rim. Do not use 3 or more balance weights.