AFTER REPAIR PROCEDURE [MZ-CD 1.6]

id0102g8801100

1.  Connect the M-MDS (IDS) to the DLC-2.

am2uuw00000728

2.  Turn the engine switch off, then to the ON position (engine off).

3.  After the vehicle is identified, select the following items from the initial screen of the IDS.

(1)  Select “Self Test”.

(2)  Select “Modules”.

(3)  Select “PCM”.

(4)  Select “Retrieve CMDTCs”

4.  Verify the DTC according to the directions on the IDS screen.

5.  Press the clear button on the DTC screen to clear the DTC.

6.  Verify that no DTCs are displayed.