NO.16 HIGH OIL CONSUMPTION/LEAKAGE [MZR 1.3, MZR 1.5]

id0103d7802200

16

HIGH OIL CONSUMPTION/LEAKAGE

DESCRIPTION

•  Oil consumption is excessive.

POSSIBLE CAUSE

•  External leakage

•  Improper dipstick

•  Improper engine oil viscosity

•  PCV valve malfunction

•  Engine internal parts malfunction

•  PCM malfunction

16	HIGH OIL CONSUMPTION/LEAKAGE
DESCRIPTION	• Oil consumption is excessive.
POSSIBLE CAUSE	• External leakage • Improper dipstick • Improper engine oil viscosity • PCV valve malfunction • Engine internal parts malfunction • PCM malfunction

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	INSPECT ENGINE OIL AND RELATED PARTS CONDITION • Inspect the following: ― External leakage ― Proper dipstick ― Proper engine oil viscosity • Is there any malfunction?	Yes	Repair or replace the malfunctioning part according to the inspection results. Repeat Step 1.
1		No	Go to the next step.
2	INSPECT IF MALFUNCTION CAUSE IS PCV VALVE OR OTHER • Inspect the PCV valve operation. (See POSITIVE CRANKCASE VENTILATION (PCV) VALVE INSPECTION [MZR 1.3, MZR 1.5].) • Is there any malfunction?	Yes	Replace the PCV valve and the oil separator as a single unit. (See POSITIVE CRANKCASE VENTILATION (PCV) VALVE REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)
2		No	Inspect the internal engine parts such as valves, valve guides, valve stem seals, cylinder head drain passage, and piston rings. Repair or replace the malfunctioning part according to the inspection results.
3	Verify test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [MZR 1.3, MZR 1.5].) • If the malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ― If the vehicle is repaired, troubleshooting is completed. ― If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)