INTAKE MANIFOLD VACUUM INSPECTION [MZR 1.3, MZR 1.5]
id011317801800
1. Remove the fresh-air duct and the air cleaner case as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)
2. Disconnect the vacuum hose connecting the intake manifold and the purge solenoid valve (purge solenoid valve side) and install the vacuum gauge.
3. Install the fresh-air duct and the air cleaner case as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)
4. Verify that the intake air hoses are installed securely.
5. Warm up the engine.
6. Measure the intake manifold vacuum while idling (no load) using the vacuum gauge.