CHARCOAL CANISTER REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5]

id011606801500

Caution

•  Disconnecting/connecting the quick release connector without cleaning it may cause damage to the fuel pipe and quick release connector. Always clean the quick release connector joint area before disconnecting/connecting using a cloth or soft brush, and make sure that it is free of foreign material.

1.  Remove in the order indicated in the table.

am2zzw00005240

1	Quick release connector (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)
2	Screw
3	Quick release connector (See Quick Release Connector Removal Note.)
4	Charcoal canister
5	Quick release connector (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)
6	Evaporative hose

2.  Install in the reverse order of removal.

Quick Release Connector Removal Note

1.  Move the charcoal canister away from the fuel tank with the quick connector connected.

2.  Disconnect the quick release connector. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)