PCM TEMPERATURE SENSOR INSPECTION [MZR 1.3, MZR 1.5]

id0140e6781500

Note

•  The PCM temperature sensor cannot be removed as a single unit. When replacing the PCM temperature sensor, replace it together with the PCM as a single unit.

1.  Connect the M-MDS to the DLC-2.

am2zzw00001289

2.  Turn the ignition switch to the ON position.

3.  Verify that the PCM temperature (PID: PCM_T) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [MZR 1.3, MZR 1.5].)

•  If not as verified, replace the PCM. (See PCM REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)