MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [MZR 1.3, MZR 1.5]

id0140e6800900

1.  Connect the M-MDS to the DLC-2.

am2zzw00001289

2.  Turn the ignition switch to the ON position.

3.  Verify that the MAP sensor output voltage (PID: MAP) within the specification. (See ON-BOARD DIAGNOSTIC TEST [MZR 1.3, MZR 1.5].) (See PCM INSPECTION [MZR 1.3, MZR 1.5].)

•  If not as specified, replace the MAP sensor. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)