ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION [MZ-CD 1.6]

id0140e7801900

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)

2.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZ-CD 1.6].)

3.  Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [MZ-CD 1.6].)

4.  Disconnect ECT sensor connector.

5.  Remove in the order indicated in the table.

am2zzw00006328

1	Clip
2	O-ring
3	ECT sensor

6.  Install in the reverse order of removal.