REAR BRAKE (DRUM) INSPECTION

id041100188500

Brake Lining Thickness Inspection

1. Remove the brake drum and measure the thickness of the brake lining.

• If it is less than the minimum specification, replace the brake shoe.

adejjw00000944

Minimum brake lining thickness

1.0 mm {0.039 in}

Brake Drum Inspection

1. Remove the drum component.

2. Measure the inner diameter of the brake drum.

• If there is marked partial wear of the brake drum, grind the surface to within the maximum brake drum inner diameter or replace it.

Brake drum wear maximum

MTX, ATX: 201.5 mm {7.933 in}

CVT: 181.5 mm {7.146 in}

adejjw00000945

3. Apply chalk to the inside of the brake drum, rub it against the brake shoe, and then inspect for scratches and uneven or abnormal wear inside the drum.

• If there is marked partial wear of the brake drum, grind the surface to within the maximum brake drum inner diameter or replace it.

4. After inspection, wipe the chalk off.

adejjw00000946