BRAKES TECHNICAL DATA
id045000800100
Item |
Specification |
---|---|
Specified fluid
|
European (L.H.D. U.K.) specs.: SAE J1703 or FMVSS116 DOT-3 or DOT-4
General (L.H.D. R.H.D.) specs.: SAE J1703 or FMVSS116 DOT-3
|
Pedal height (reference value)
|
206 mm {8.11 in}
|
Standard pedal play
|
2.6—4.7 mm {0.11—0.18 in}
|
Standard pedal-to-floor clearance
|
70.8 mm {2.79 in} or more
|
Front disc plate runout limit
|
0.04 mm {0.002 in}
|
Minimum front disc plate thickness
|
MTX, ATX: 21 mm {0.83 in}
CVT: 18 mm {0.71 in}
|
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
|
MTX, ATX: 21.8 mm {0.858 in}
CVT: 18.8 mm {0.740 in}
|
Minimum front disc pad thickness (MTX, ATX)
|
European (L.H.D. U.K.) specs.: 2.0 mm {0.079 in}
General (L.H.D. R.H.D.) specs.: 1.5 mm {0.059 in}
|
Minimum front disc pad thickness (CVT)
|
2.0 mm {0.079 in}
|
Minimum brake lining thickness
|
1.0 mm {0.039 in}
|
Brake drum wear maximum
|
MTX, ATX: 201.5 mm {7.933 in}
CVT: 181.5 mm {7.146 in}
|
Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}
|
2—5 notches
|
Standard power brake unit non-servo operation
Vacuum amount at 0 kPa {0 mmHg, 0 inHg} |
|
---|---|
Pedal force |
Fluid pressure |
200 N {20.4 kgf, 45.0 lbf}
|
310 kPa {3.16 kgf/cm2, 45.0 psi} or more
|
Standard power brake unit servo operation
Vacuum amount at 66.7 kPa {500 mmHg, 19.7 inHg} |
|
---|---|
Pedal force |
Fluid pressure |
200 N {20.4 kgf, 45.0 lbf}
|
7,500 kPa {76.48 kgf/cm2, 1088 psi} or more
|