CLUTCH COVER INSPECTION [F35M-R]

id051005800800

1.  Remove the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)

2.  Measure the wear of the diaphragm spring fingers.

acxaaw00000732

Clutch cover diaphragm spring fingers maximum depth
0.6 mm {0.02 in}
•  If it exceeds the maximum specification, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)

3.  Measure the flatness of the pressure plate with a straight edge and a feeler gauge.

acxaaw00000733

Maximum clearance of flatness of the pressure plate
0.5 mm {0.02 in}
•  If it exceeds the maximum specification, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)

4.  When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.

5.  Rotate the flywheel and check for misaligned diaphragm spring fingers.

adejjw00001003

Clutch cover diaphragm spring fingers maximum height difference
1.0 mm {0.039 in}
•  If it exceeds the maximum specification, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)