CLUTCH DISC INSPECTION [F35M-R]

id051005800900

1.  Remove the clutch disc. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)

2.  Inspect the lining surface for discoloration and grease adhesion.

3.  Inspect the torsion spring for weakness and the rivet for looseness.

4.  Using a vernier caliper, measure the depth between the lining surface and the rivet head.

am2zzw00005825

•  If it is less than the minimum specification, replace the clutch disc. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)
Clutch disc minimum depth
0.3 mm {0.01 in}

5.  Measure the clutch disc runout using a dial gauge.

am2zzw00000165

•  If it exceeds the maximum specification, replace the clutch disc. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)
Clutch disc maximum runout
0.7 mm {0.03 in}